| 1 |
rotor |
1 |
ASM-MEC |
|
| 1.01 |
rotor front mounting plate |
3 |
COM-MAN |
Laser part, aluminium/stainless steel, 2 mm thick, RotorFrontMountingPlate.dxf |
| 1.02 |
rotor blade |
3 |
COM-MAN |
larch tree, air-dried, knot-free, blade measurements: 1050 x 80 x 27 mm |
| 1.03 |
rotor blade fastener bolt |
9 |
COM-STD |
DIN 912 M6 x 50 mm, property class 8.8, metric bolt, cylinder head with hexagon socket |
| 1.04 |
rotor blade fastener slot nut |
3 |
COM-STD |
DIN 508-8-M6-8/10, T-Slot-Nut |
| 1.05 |
rotor blade fastener nut |
6 |
COM-STD |
DIN 985 M6, hexagon lock nut, with polyamide clamping piece |
| 1.06 |
rotor blade fastener washer |
6 |
COM-STD |
DIN 125 A M6, 6.4 x 12 x 1.6 mm, washer |
| 1.07 |
boiled linseed oil |
1 |
COM-BUY |
100 ml |
| 2 |
alternator rotor |
1 |
ASM-MEC |
|
| 2.01 |
upwind magnet disc |
1 |
COM-MAN |
Laser part, steel S235 or S355, 6 mm thick, no surface treatment, UpwindMagnetDiscSlotNut.dxf |
| 2.02 |
taper bush |
1 |
COM-BUY |
Article ID.: 62250325,Taper bush 1210, bore 25 mm |
| 2.03 |
taper bush setscrew |
2 |
COM-STD |
part of the scope of delivery of the taper bush, see pos. 2.02 |
| 2.04 |
taper bush hub |
1 |
COM-BUY |
Article ID.: 14090120, Taper bush hub for Taper Bush size 1210, 120 mm outer diameter |
| 2.05 |
taper bush hub fastener bolt |
6 |
COM-STD |
DIN 912 M6 x 25 mm, property class 8.8, cylinder head with hexagon socket |
| 2.06 |
taper bush hub fastener nut |
6 |
COM-STD |
DIN 985 M6, hexagon lock nut, with polyamide clamping piece |
| 2.07 |
taper bush hub fastener washer |
12 |
COM-STD |
DIN 125 A, for M6, 6.4 x 12 x 1.6 mm, washer |
| 2.08 |
magnet stencil |
2 |
COM-MAN |
Laser part, aluminium/stainless steel, 2 mm thick, MagnetStencil.dxf |
| 2.09 |
ferrite magnet |
24 |
COM-BUY |
Ferrit Magnet 50 x 50 x 20 mm |
| 2.10 |
spacer sleeve |
9 |
COM-BUY |
Stainless steel sleeves 8 x 6 x 1 mm (up to M6), 50 mm length |
| 2.11 |
discs fastener bolt |
9 |
COM-STD |
DIN 912 M6 x 85 mm, stainless Steel A2, metric bolt, cylinder head with hexagon socket |
| 2.12 |
discs fastener nut |
9 |
COM-STD |
DIN 985 M6, stainless Steel A2, hexagon lock nut, with polyamide clamping piece |
| 2.13 |
discs fastener washer |
18 |
COM-STD |
DIN 125 A, for M6, 6.4 x 12 x 1,6 mm, stainless steel A2, washer |
| 2.14 |
downwind magnet disc |
1 |
COM-MAN |
Laser part, steel S235 or S355, 6 mm thick, no surface treatment, DownwindMagnetDisc.dxf |
| 2.15 |
two component epoxy adhesive |
2 |
COM-BUY |
Two-component epoxy adhesive, min. 45 min hardening time |
| 2.16 |
exterior metal paint |
1 |
COM-BUY |
200 ml |
| 3 |
shaft |
1 |
COM-BUY |
"Precision shaft steel CF53, hardened, dressed to size, chromed, 25 (h7) x 1000mm: 64762500, per windkit 125 mm needed |
| 4 |
alternator stator |
|
ASM-MEC |
|
| 4.01 |
mounting inlay |
1 |
COM-MAN |
Laser part, steel S235 or S355, 6 mm thick, no surface treatment, MountingInlayUkf205Mt60.dxf |
| 4.02 |
stator cast |
1 |
COM-BUY |
Epoxy resin and hardener, approx. 1.4 l (depending on mould) |
| 4.03 |
talcum powder |
1 |
COM-BUY |
Approx. 700 g. |
| 4.04 |
fibreglass cloth |
2 |
COM-BUY |
biaxial woven roving, 370 x 370 mm |
| 4.05 |
copper wire coils |
9 |
COM-BUY |
Approx. 3.6 kg of copper wire, 1.6 mm Diameter, Grade 2, 200°C heat resistant, approx. 400 g per coil, approx. 3.6 kg per windkit needed |
| 4.06 |
mounting inlay fastener bolt |
4 |
COM-STD |
DIN 912 M12 x 60 mm, property class 8.8, metric bolt, cylinder head with hexagon socket |
| 4.07 |
mounting inlay fastener nut |
4 |
COM-STD |
DIN 985 M12, hexagon lock nut, with polyamide clamping piece |
| 4.08 |
mounting inlay fastener washer |
8 |
COM-STD |
DIN 125 A, for M12, 13 x 24 x 2,5 mm, washer |
| 4.09 |
stator plug |
1 |
COM-BUY |
MT60 connector, male part |
| 4.10 |
exterior paint |
1 |
COM-BUY |
100 ml |
| 5 |
nacelle |
1 |
ASM-MEC |
|
| 5.01 |
housing bearing |
2 |
COM-BUY |
UKF205, ball bearing unit with cast metal housing, locking on shaft via set screw |
| 5.02 |
bearing mounting plate |
1 |
COM-MAN |
Laser part, steel S235 or S355, 6 mm thick, no surface treatment, BearingMountingPlateUkf205.dxf |
| 5.03 |
upper spacer |
1 |
COM-MAN |
Laser part, steel S235 or S355, 6 mm thick, no surface treatment, UpperSpacer.dxf |
| 5.04 |
lower spacer |
1 |
COM-MAN |
Laser part, steel S235 or S355, 6 mm thick, no surface treatment, LowerSpacer.dxf |
| 5.05 |
yaw pipe |
1 |
COM-BUY |
Cylindric pipe, steel, no surface treatment, 60.3 x 3.65 x 140 mm |
| 5.06 |
cable gland |
1 |
COM-BUY |
M25 x 1.5, cable range 9.0 - 16.0 mm |
| 5.07 |
wind vane socket |
1 |
COM-MAN |
Laser part, steel S235 or S355, 6 mm thick, no surface treatment, WindVaneSocket.dxf |
| 5.08 |
exterior metal paint |
1 |
COM-BUY |
|
| 6 |
wind vane |
1 |
ASM-MEC |
|
| 6.01 |
vane |
1 |
COM-MAN |
plywood, birch waterproof glued BFU100, 650 x 350 x 6 mm |
| 6.02 |
vane pipe |
1 |
COM-BUY |
Cylindric pipe, steel, no surface treatment, 33.7 x 2.5 x 400 mm |
| 6.03 |
vane mounting |
1 |
COM-MAN |
Laser part, steel S235 or S355, 6 mm thick, no surface treatment, VaneMounting.dxf |
| 6.04 |
vane fastener bolt |
7 |
COM-STD |
DIN 912 M6 x 25 mm, property class 8.8, metric bolt, cylinder head with hexagon socket |
| 6.05 |
vane fastener nut |
7 |
COM-STD |
DIN 985 M6, hexagon lock nut, with polyamide clamping piece |
| 6.06 |
vane fastener washer |
14 |
COM-STD |
DIN 125 A, for M6, 6.4 x 12 x 1.6 mm, washer |
| 6.07 |
u bolt clamp bolt |
4 |
COM-STD |
DIN 3570, Form A, nominal size DN25, dimension A = 38 mm, M10, steel strap for tubes, for pipe outer diameter 30-34 mm |
| 6.08 |
u bolt clamp washer |
8 |
COM-STD |
DIN 985 M10, hexagon lock nut, with polyamide clamping piece |
| 6.09 |
u bolt clamp nut |
8 |
COM-STD |
DIN 125 A, for M10, washer |
| 6.10 |
boiled linseed oil |
1 |
COM-BUY |
50 ml |
| 6.11 |
exterior wood paint |
1 |
COM-BUY |
200 ml |
Iman