Skip to content

GitLab

1.Bill of materials · Changes

Page history
Add TsDC-ID for alternator stator. #14 authored by immanuel ernix's avatar immanuel ernix
Show whitespace changes
Inline Side-by-side
3.Tools-and-materials/1.Bill-of-materials.md
View page @ d2c86050
...@@ -37,7 +37,7 @@ The bill of materials (BOM) follows the BOM proposal of [DIN SPEC 3105](https:// ...@@ -37,7 +37,7 @@ The bill of materials (BOM) follows the BOM proposal of [DIN SPEC 3105](https://
| 2.15 | two component epoxy adhesive | 2 | COM-BUY | Two-component epoxy adhesive, min. 45 min hardening time | | 2.15 | two component epoxy adhesive | 2 | COM-BUY | Two-component epoxy adhesive, min. 45 min hardening time |
| 2.16 | exterior metal paint | 1 | COM-BUY | 200 ml | | 2.16 | exterior metal paint | 1 | COM-BUY | 200 ml |
| 3 | shaft | 1 | COM-BUY | "Precision shaft steel CF53, hardened, dressed to size, chromed, 25 (h7) x 1000mm: 64762500, per windkit 125 mm needed | | 3 | shaft | 1 | COM-BUY | "Precision shaft steel CF53, hardened, dressed to size, chromed, 25 (h7) x 1000mm: 64762500, per windkit 125 mm needed |
| 4 | alternator stator | | | | | 4 | alternator stator | | ASM-MEC | |
| 4.01 | mounting inlay | 1 | COM-MAN | Laser part, steel S235 or S355, 6 mm thick, no surface treatment, MountingInlayUkf205Mt60.dxf | | 4.01 | mounting inlay | 1 | COM-MAN | Laser part, steel S235 or S355, 6 mm thick, no surface treatment, MountingInlayUkf205Mt60.dxf |
| 4.02 | stator cast | 1 | COM-BUY | Epoxy resin and hardener, approx. 1.4 l (depending on mould) | | 4.02 | stator cast | 1 | COM-BUY | Epoxy resin and hardener, approx. 1.4 l (depending on mould) |
| 4.03 | talcum powder | 1 | COM-BUY | Approx. 700 g. | | 4.03 | talcum powder | 1 | COM-BUY | Approx. 700 g. |
......