| ... | ... | @@ -12,7 +12,7 @@ Some tooling for the windkit needs to be manufactured in advance. For ease of id |
|
|
|
The following table lists all tools needed to build and assemble a windkit.
|
|
|
|
|
|
|
|
| Pos. | Icon | Name | Categorie | Tool description | Used to | Used to manufacture component |
|
|
|
|
| ---- | ---- | ------------------------------------- | --------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------ | ---------------------------------------------------------------------------------- |
|
|
|
|
| ---- | ---- | ------------------------------------- | --------- | --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- | ------------------------------------------------------------------------------------------ | -------------------------------------------------------------------------------------------------------------- |
|
|
|
|
| 1 | | Vacuum infusion stator mould | MAN | See ["Vacuum Injection Stator Mold Plans"](https://resystech.com/vacuum-injection-stator-mold.html) by James Biggar. Not 100% necessary. You can also use Pos. 2. | | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
|
|
|
|
| 2 | | Casting stator mould | MAN | See["2F Wind Turbine Construction Manual"](https://scoraigwind.co.uk/2014/06/ebook-plans-for-2f-turbine-now-finally-published/) by Hugh Piggott. Either use this or Pos. 1. | | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
|
|
|
|
| 3 | | Coil winder | MAN | See["2F Wind Turbine Construction Manual"](https://scoraigwind.co.uk/2014/06/ebook-plans-for-2f-turbine-now-finally-published/) by Hugh Piggott or ["Stator Coil Winder Plans"](https://renewablesystemstechnology.com/coil-winder.html) by Hames Biggar. | | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
|
| ... | ... | @@ -44,8 +44,8 @@ The following table lists all tools needed to build and assemble a windkit. |
|
|
|
| 29 | | Bucket / Pot | BUY | 2l Volume. | For resin mixing. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
|
|
|
|
| 30 | | Sticks / Spoon | BUY | | Mixing resin. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
|
|
|
|
| 31 | | Pliers | BUY | | | |
|
|
|
|
| 32 | | Wrench | BUY | Size: 10 mm, 16 mm, 18 mm | | [Nacelle](5.Let's build/Nacelle), Alternator, [Wind vane](5.Let's-build/Wind-Vane) |
|
|
|
|
| 33 | | Hex/allen key | BUY | Size: 5 mm, 10 mm | | [Nacelle](5.Let's build/Nacelle), Alternator, [Wind vane](5.Let's-build/Wind-Vane) |
|
|
|
|
| 32 | | Wrench | BUY | Size: 10 mm, 16 mm, 18 mm | | [Nacelle](5.Let's build/Nacelle), [Alternator](5.Let's-build/Alternator), [Wind vane](5.Let's-build/Wind-Vane) |
|
|
|
|
| 33 | | Hex/allen key | BUY | Size: 5 mm, 10 mm | | [Nacelle](5.Let's build/Nacelle), [Alternator](5.Let's-build/Alternator), [Wind vane](5.Let's-build/Wind-Vane) |
|
|
|
|
| 34 | | Paintbrush | BUY | | | |
|
|
|
|
| 35 | | Wing dividers / French spring divider | BUY | | General measuring equimpent | |
|
|
|
|
| 36 | | Calliper | BUY | | General measuring equimpent | |
|
| ... | ... | |
