Skip to content

GitLab

2.Tools · Changes

Page history
Update 2.Tools: correct, change and complete spelling, words, numbering and little things authored by dave ernix's avatar dave ernix
Hide whitespace changes
Inline Side-by-side
3.Tools-and-materials/2.Tools.md
View page @ ed691b96
......@@ -16,45 +16,45 @@ The following table lists all tools needed to build and assemble a windkit.
| 1 | | Vacuum infusion stator mould | MAN | See ["Vacuum Injection Stator Mold Plans"](https://resystech.com/vacuum-injection-stator-mold.html) by James Biggar. Not 100% necessary. You can also use Pos. 2. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 2 | | Casting stator mould | MAN | See["2F Wind Turbine Construction Manual"](https://scoraigwind.co.uk/2014/06/ebook-plans-for-2f-turbine-now-finally-published/) by Hugh Piggott. Either use this or Pos. 1. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 3 | | Coil winder | MAN | See["2F Wind Turbine Construction Manual"](https://scoraigwind.co.uk/2014/06/ebook-plans-for-2f-turbine-now-finally-published/) by Hugh Piggott | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 4 | | Welding  equipment | BUY | MAG welding or stick welding to weld 6 mm steel. | [Nacelle](5.Let's build/Nacelle) |
| 5 | | Welding magnets | BUY | Temporary fix components in position | [Nacelle](5.Let's build/Nacelle) |
| 4 | | Welding equipment | BUY | MAG welding or stick welding to weld 6 mm steel. | [Nacelle](5.Let's build/Nacelle) |
| 5 | | Welding magnets | BUY | Temporary fix components in position. | [Nacelle](5.Let's build/Nacelle) |
| 6 | | Self locking pliers / Vice grips | BUY | Hold hot metal parts during welding procedure. | [Nacelle](5.Let's build/Nacelle) |
| 7 | | Drill press | BUY | Not 100% necessary but recommendet. Holes can also be drilled with Pos. 8. | [Rotor blade](5.Let's-build/Rotor-Blade), [Nacelle](5.Let's build/Nacelle) |
| 7 | | Drill press | BUY | Not 100% necessary, but recommendet. Holes can also be drilled with Pos. 8. | [Rotor blade](5.Let's-build/Rotor-Blade), [Nacelle](5.Let's build/Nacelle) |
| 8 | | Cordless drill | BUY | Drill wood and metal. | [Rotor blade](5.Let's-build/Rotor-Blade) |
| | | Angle grinder | BUY | Cut and grind metal. | [Nacelle](5.Let's build/Nacelle), [Wind vane](5.Let's-build/Wind-Vane) |
| | | Hack saw | BUY | Cut metal by hand. | [Nacelle](5.Let's build/Nacelle), [Wind vane](5.Let's-build/Wind-Vane) |
| | | Files | BUY | | [Nacelle](5.Let's build/Nacelle) |
| | | Hammer | BUY | | [Nacelle](5.Let's build/Nacelle) |
| | | Center punch | BUY | Mark drill positions | [Nacelle](5.Let's build/Nacelle) |
| | | Jigsaw | BUY | | [Wind vane](5.Let's-build/Wind-Vane) |
| | | Japanese saw | BUY | | [Rotor blade](5.Let's-build/Rotor-Blade) |
| | | Spokeshave | BUY | Straight blade | [Rotor blade](5.Let's-build/Rotor-Blade) |
| | | Draw knive | BUY | Straight blade | [Rotor blade](5.Let's-build/Rotor-Blade) |
| | | Chisel | BUY | | [Rotor blade](5.Let's-build/Rotor-Blade) |
| | | Mallet | BUY | | [Rotor blade](5.Let's-build/Rotor-Blade) |
| | | Sharpening stone | BUY | To sharpen blades of chisels, draw knive and spokeshave | [Rotor blade](5.Let's-build/Rotor-Blade) |
| | | Sand paper | BUY | 80, 150, 240, 320 graining | [Rotor blade](5.Let's-build/Rotor-Blade) |
| | | Soldering iron | BUY | | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| | | Multimeter | BUY | Measure voltage. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| | | Wire cutter | BUY | | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| | | Wire stripper | BUY | | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| | | Cutter knife | BUY | | |
| | | Weighing scale | BUY | Weigh epoxy resin and talcum poder. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| | | Spirit level | BUY | Angle stator cast mould. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| | | Bucket/Pot | BUY | 2l Volume. For resin mixing. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| | | Sticks/Spoon | BUY | Mixing resin. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| | | Pliers | BUY | | |
| | | Wrench | BUY | Size: 10 mm, 16 mm, 18 mm | [Nacelle](5.Let's build/Nacelle), Alternator, [Wind vane](5.Let's-build/Wind-Vane) |
| | | Hex/allen key | BUY | Size: 5 mm, 10 mm | [Nacelle](5.Let's build/Nacelle), Alternator, [Wind vane](5.Let's-build/Wind-Vane) |
| | | Paintbrush | BUY | | |
| | | Wing dividers / French spring divider | BUY | General measuring equimpent | |
| | | Calliper | BUY | General measuring equimpent | |
| | | Square | BUY | General measuring equimpent | |
| | | Tape measure | BUY | General measuring equimpent | |
| | | Folding rule | BUY | General measuring equimpent | |
| | | Flexible steel precision rule | BUY | General measuring equimpent | |
| | | Protective glasses | BUY | Safety gear | |
| | | Ear protector | BUY | Safety gear | |
| | | Thick leather gloves | BUY | Safety gear: Protection against heat, sparks and UV-radiation whilst welding. | [Nacelle](5.Let's build/Nacelle) |
| | | Rubber gloves | BUY | Safety gear: Working with metal and for assembly process. | |
| | | Nitrile gloves | BUY | Safety gear: Handling epoxy resin. Latex gloves decompose when touching artificial resins. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 9 | | Angle grinder | BUY | Cut and grind metal. | [Nacelle](5.Let's build/Nacelle), [Wind vane](5.Let's-build/Wind-Vane) |
| 10 | | Hacksaw | BUY | Cut metal by hand. | [Nacelle](5.Let's build/Nacelle), [Wind vane](5.Let's-build/Wind-Vane) |
| 11 | | Files | BUY | File wood and metal. | [Nacelle](5.Let's build/Nacelle) |
| 12 | | Hammer | BUY | Punch center punch. | [Nacelle](5.Let's build/Nacelle) |
| 13 | | Center punch | BUY | Mark drill positions. | [Nacelle](5.Let's build/Nacelle) |
| 14 | | Jigsaw | BUY | woodwork (windvane and mould) | [Wind vane](5.Let's-build/Wind-Vane) |
| 15 | | Japanese saw | BUY | woodwork (straight blade) | [Rotor blade](5.Let's-build/Rotor-Blade) |
| 16 | | Spokeshave | BUY | woodwork (straight blade) | [Rotor blade](5.Let's-build/Rotor-Blade) |
| 17 | | Draw knive | BUY | woodwork (straight blade) | [Rotor blade](5.Let's-build/Rotor-Blade) |
| 18 | | Chisel | BUY | woodwork (straight blade) | [Rotor blade](5.Let's-build/Rotor-Blade) |
| 19 | | Mallet | BUY | woodwork (straight blade) | [Rotor blade](5.Let's-build/Rotor-Blade) |
| 20 | | Sharpening stone | BUY | To sharpen blades of chisels, draw knive and spokeshave. | [Rotor blade](5.Let's-build/Rotor-Blade) |
| 21 | | Sand paper | BUY | 80, 150, 240, 320 graining | [Rotor blade](5.Let's-build/Rotor-Blade) |
| 22 | | Soldering iron | BUY | | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 23 | | Multimeter | BUY | Measure voltage. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 24 | | Wire cutter | BUY | | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 25 | | Wire stripper | BUY | | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 26 | | Cutter knife | BUY | | |
| 27 | | Weighing scale | BUY | Weigh epoxy resin and talcum poder. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 28 | | Spirit level | BUY | Angle stator cast mould. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 29 | | Bucket / Pot | BUY | 2l Volume. For resin mixing. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 30 | | Sticks / Spoon | BUY | Mixing resin. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |
| 31 | | Pliers | BUY | | |
| 32 | | Wrench | BUY | Size: 10 mm, 16 mm, 18 mm | [Nacelle](5.Let's build/Nacelle), Alternator, [Wind vane](5.Let's-build/Wind-Vane) |
| 33 | | Hex/allen key | BUY | Size: 5 mm, 10 mm | [Nacelle](5.Let's build/Nacelle), Alternator, [Wind vane](5.Let's-build/Wind-Vane) |
| 34 | | Paintbrush | BUY | | |
| 35 | | Wing dividers / French spring divider | BUY | General measuring equimpent | |
| 36 | | Calliper | BUY | General measuring equimpent | |
| 37 | | Square | BUY | General measuring equimpent | |
| 38 | | Tape measure | BUY | General measuring equimpent | |
| 39 | | Folding rule | BUY | General measuring equimpent | |
| 40 | | Flexible steel precision rule | BUY | General measuring equimpent | |
| 41 | | Protective glasses | BUY | Safety gear | |
| 42 | | Ear protector | BUY | Safety gear | |
| 43 | | Thick leather gloves | BUY | Safety gear: Protection against heat, sparks and UV-radiation whilst welding. | [Nacelle](5.Let's build/Nacelle) |
| 44 | | Rubber gloves | BUY | Safety gear: Working with metal and for assembly process. | |
| 45 | | Nitrile gloves | BUY | Safety gear: Handling epoxy resin. Latex gloves decompose when touching artificial resins. | [Alternator - Stator](5.Let's-build/Alternator/Alternator-Stator) |