| ... | ... | @@ -18,17 +18,17 @@ See pos. 2 in the [BOM](/3.Tools-and-materials/1.Bill-of-materials), not all mat |
|
|
|
|
|
|
|
### 1. Clean all metal components used in this assembly
|
|
|
|
|
|
|
|
Use acetone for cleaning and protective gear during this assembly.
|
|
|
|
Use protective gear and acetone for cleaning during this assembly.
|
|
|
|
|
|
|
|
### 2. Prepare Downwind Magnet Disk
|
|
|
|
|
|
|
|
Place the Downwind Magnetic Disc on your workbench, and don't forget to put a piece of cardboard or similar underneath to protect your workbench.
|
|
|
|
Place the Downwind Magnetic Disc on your workbench. Don't forget to put a piece of cardboard or similar underneath to protect your workbench.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
### 3. Prepare the glue
|
|
|
|
|
|
|
|
Before mixing the two component epoxy adhesive, check that you have all the components ready for the next steps. After that mix the two component adhesive after the manufacturer specifications.
|
|
|
|
Before mixing the two component epoxy adhesive, check that you have all the components ready for the next steps. After that mix the two component adhesive according to the manufacturer's specifications.
|
|
|
|
|
|
|
|
### 4. Completely moisten the Downwind Magnet Disk with epoxy adhesive
|
|
|
|
|
| ... | ... | @@ -58,6 +58,8 @@ Use acetone for cleaning and protective gear during this assembly. |
|
|
|
|
|
|
|
### 2. Prepare Upwind Magnet Disk
|
|
|
|
|
|
|
|
Use the same process as above.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
### 3. Completely moisten the Downwind Magnet Disk with epoxy adhesive
|
| ... | ... | @@ -73,7 +75,7 @@ To ensure the stencil is perfectly placed, use a few screws to secure it to the |
|
|
|
|
|
|
|
### 5. Place the Magnets
|
|
|
|
|
|
|
|
This time check the position of the first magnet with one of the glued Downwind Magnet Disk for the first magnet you place. As mentioned above, the opposite magnet must have the reverse polarity (The magnets attract each other.) to create the desired magnetic flux. Once the first magnet is in place, repeat the process while alternating the polarity like before.
|
|
|
|
This time check the position of the first magnet with one of the glued Downwind Magnet Disk for the first magnet you place. As mentioned above, the opposing magnet on the other disc must have the reverse polarity (the magnets attract each other.) to create the desired magnetic flux. Once the first magnet is in place, repeat the process while alternating the polarity like before.
|
|
|
|
|
|
|
|
|
|
|
|
|
| ... | ... | |
