5.Let's-build/Alternator/Alternator-Stator.md

@@ -16,7 +16,7 @@ See pos. 4 in the [BOM](/3.Tools-and-materials/1.Bill-of-materials), not all mat
 
 ## 1. Setup your Coil Winder
 
-Winding the coils requires a Coil Winder. There are several construction plans available on how to build a coil winder. Have a look at the tools section to find the one best suited for you. The coil winder needs to have the right dimensions. More specifically, the cheek pieces and the spacer need to meet requirements. To get the right dimensions have a look at our CAD model. We recommend a manual coil winder.
+Winding the coils requires a Coil Winder. There are several construction plans available on how to build a coil winder. Have a look at the [tools section](/3.Tools-and-materials/2.Tools) to find the one best suited for you. The coil winder needs to have the right dimensions. More specifically, the cheek pieces and the spacer need to meet requirements. To get the right dimensions have a look at our CAD model. We recommend a manual coil winder.
 
 ## 2. Wind the coils
 
@@ -28,7 +28,6 @@ Once you have set up your Coil Winder, start making the first coil. Our coils ha
 
 All coils must be similar in order to have a constant load. To achieve this, use a scale to compare the weight of the coils and measure the resistance with a multimeter.
 
-
 ## 4. Draw a template
 
 Take a cardboard or thin plywood and draw two circles starting from a center point as shown below.