5.Let's-build/Nacelle.md

+[[_TOC_]]
+
+# Overview
+
+![SubAssembly.Nacelle](../img/Nacelle/SubAssembly.Nacelle.png)
+
+# Materials needed
+| **No.** | **Component** | **Units** | **Category** | **Product Name** |
+|---------|---------------|-----------|--------------|------------------|
+| 1 | Bearing Mounting Plate | 1 | Laser | Steel S235 Or S355, 6 Mm Thick, No Surface Treatment |
+| 2 | Upper Spacer | 1 | Laser | Steel S235 Or S355, 6 Mm Thick, No Surface Treatment |
+| 3 | Lower Spacer | 1 | Laser | Steel S235 Or S355, 6 Mm Thick, No Surface Treatment |
+| 4 | Yaw Pipe | 1 | Catalogue | Cylindric Pipe, Steel, No Surface Treatment, 60,3 X 3,65 X 140 Mm |
+| 5 | Cable Gland | 1 | Catalogue | Tbd |
+| 6 | Wind Vane Socket | 1 | Laser | Steel S235 Or S355, 6 Mm Thick, No Surface Treatment |
+
+# Tools needed
+| No. | Name |  |
+|-----|------|--|
+| 1 | Welder  |  |
+| 2 | Welding equipment | Gloves, Helmet, Welding Magnets |
+| 3 | Square |  |
+| 4 | Angle Grinder |  |
+| 5 | Safety Glasses |  |
+| 6 | Level |  |
+| 7 | Meter |  |
+
+# Build
+
+## 1.Place Upper Spacer on to the Yaw Pipe
+
+![SubAssembly.Nacelle_1](../img/Nacelle/SubAssembly.Nacelle_1.png)
+
+## 2.Spot-weld Upper Spacer on to the Yaw Pipe
+
+![SubAssembly.Nacelle_2](../img/Nacelle/SubAssembly.Nacelle_2.png)
+
+## 3.Place and Bearing Mounting Plate and Lower Spacer
+
+![SubAssembly.Nacelle_3](../img/Nacelle/SubAssembly.Nacelle_3.png) ![SubAssembly.Nacelle_4](../img/Nacelle/SubAssembly.Nacelle_4.png)
+
+## 4.Spot-weld Bearing Mounting Plate and Lower Spacer
+
+![SubAssembly.Nacelle_5](../img/Nacelle/SubAssembly.Nacelle_5.png)
+
+## 5.Weld Bearing Mounting Plate and Lower Spacer
+
+![SubAssembly.Nacelle_6](../img/Nacelle/SubAssembly.Nacelle_6.png)
+
+## 6.Place the Wind Vane Socket
+
+> 15mm distance
+
+![SubAssembly.Nacelle_7](../img/Nacelle/SubAssembly.Nacelle_7.png) ![SubAssembly.Nacelle_8](../img/Nacelle/SubAssembly.Nacelle_8.png)
+
+## 7.Weld the Wind Vane Socket
+
+![SubAssembly.Nacelle_9](../img/Nacelle/SubAssembly.Nacelle_9.png)
+
+## 8.Paint the Nacelle
+
+![SubAssembly.Nacelle_10](../img/Nacelle/SubAssembly.Nacelle_10.png)
+
+## 9.Mount the Cable Gland
+
+![SubAssembly.Nacelle_11](../img/Nacelle/SubAssembly.Nacelle_11.png)
+![SubAssembly.Nacelle_12](../img/Nacelle/SubAssembly.Nacelle_12.png)
\ No newline at end of file