Skip to content

GitLab

Nacelle · Changes

Page history
Update Nacelle: numbered, small Stuff, >15 mm descripted in one sentence authored by dave ernix's avatar dave ernix
Hide whitespace changes
Inline Side-by-side
5.Let's-build/Nacelle.md
View page @ a3caeba7
......@@ -10,36 +10,36 @@ See pos. 5 in the [BOM](/3.Tools-and-materials/1.Bill-of-materials#5), not all m
# Build
## 1.Place Upper Spacer on to the Yaw Pipe
## 1. Place Upper Spacer on to the Yaw Pipe
![SubAssembly.Nacelle_1](../img/Nacelle/SubAssembly.Nacelle_1.png)
## 2.Tack-weld Upper Spacer on to the Yaw Pipe
## 2. Tack-weld Upper Spacer on to the Yaw Pipe
![SubAssembly.Nacelle_2](../img/Nacelle/SubAssembly.Nacelle_2.png)
## 3.Place and Bearing Mounting Plate and Lower Spacer
## 3. Place and Bearing Mounting Plate and Lower Spacer
![SubAssembly.Nacelle_3](../img/Nacelle/SubAssembly.Nacelle_3.png) ![SubAssembly.Nacelle_4](../img/Nacelle/SubAssembly.Nacelle_4.png)
## 4.Tack-weld Bearing Mounting Plate and Lower Spacer
## 4. Tack-weld Bearing Mounting Plate and Lower Spacer
![SubAssembly.Nacelle_5](../img/Nacelle/SubAssembly.Nacelle_5.png)
## 5.Weld Bearing Mounting Plate and Lower Spacer
## 5. Weld Bearing Mounting Plate and Lower Spacer
![SubAssembly.Nacelle_6](../img/Nacelle/SubAssembly.Nacelle_6.png)
## 6.Place the Wind Vane Socket
## 6. Place the Wind Vane Socket
> 15mm distance
Weld the Wind Vane Socket approximately 15 mm above the bottom.
![SubAssembly.Nacelle_7](../img/Nacelle/SubAssembly.Nacelle_7.png) ![SubAssembly.Nacelle_8](../img/Nacelle/SubAssembly.Nacelle_8.png)
## 7.Weld the Wind Vane Socket
## 7. Weld the Wind Vane Socket
![SubAssembly.Nacelle_9](../img/Nacelle/SubAssembly.Nacelle_9.png)
## 8.Paint the Nacelle
## 8. Paint the Nacelle
![SubAssembly.Nacelle_10](../img/Nacelle/SubAssembly.Nacelle_10.png)
\ No newline at end of file