5.Let's-build/Nacelle.md

@@ -10,36 +10,36 @@ See pos. 5 in the [BOM](/3.Tools-and-materials/1.Bill-of-materials#5), not all m
 
 # Build
 
-## 1.Place Upper Spacer on to the Yaw Pipe
+## 1. Place Upper Spacer on to the Yaw Pipe
 
 ![SubAssembly.Nacelle_1](../img/Nacelle/SubAssembly.Nacelle_1.png)
 
-## 2.Tack-weld Upper Spacer on to the Yaw Pipe
+## 2. Tack-weld Upper Spacer on to the Yaw Pipe
 
 ![SubAssembly.Nacelle_2](../img/Nacelle/SubAssembly.Nacelle_2.png)
 
-## 3.Place and Bearing Mounting Plate and Lower Spacer
+## 3. Place and Bearing Mounting Plate and Lower Spacer
 
 ![SubAssembly.Nacelle_3](../img/Nacelle/SubAssembly.Nacelle_3.png) ![SubAssembly.Nacelle_4](../img/Nacelle/SubAssembly.Nacelle_4.png)
 
-## 4.Tack-weld Bearing Mounting Plate and Lower Spacer
+## 4. Tack-weld Bearing Mounting Plate and Lower Spacer
 
 ![SubAssembly.Nacelle_5](../img/Nacelle/SubAssembly.Nacelle_5.png)
 
-## 5.Weld Bearing Mounting Plate and Lower Spacer
+## 5. Weld Bearing Mounting Plate and Lower Spacer
 
 ![SubAssembly.Nacelle_6](../img/Nacelle/SubAssembly.Nacelle_6.png)
 
-## 6.Place the Wind Vane Socket
+## 6. Place the Wind Vane Socket
 
-> 15mm distance
+Weld the Wind Vane Socket approximately 15 mm above the bottom.
 
 ![SubAssembly.Nacelle_7](../img/Nacelle/SubAssembly.Nacelle_7.png) ![SubAssembly.Nacelle_8](../img/Nacelle/SubAssembly.Nacelle_8.png)
 
-## 7.Weld the Wind Vane Socket
+## 7. Weld the Wind Vane Socket
 
 ![SubAssembly.Nacelle_9](../img/Nacelle/SubAssembly.Nacelle_9.png)
 
-## 8.Paint the Nacelle
+## 8. Paint the Nacelle
 
 ![SubAssembly.Nacelle_10](../img/Nacelle/SubAssembly.Nacelle_10.png)
\ No newline at end of file