lilal- Overview
- Materials needed
- Tools needed
-
Build
- 1.Place Upper Spacer on to the Yaw Pipe
- 2.Tack-weld Upper Spacer on to the Yaw Pipe
- 3.Place and Bearing Mounting Plate and Lower Spacer
- 4.Tack-weld Bearing Mounting Plate and Lower Spacer
- 5.Weld Bearing Mounting Plate and Lower Spacer
- 6.Place the Wind Vane Socket
- 7.Weld the Wind Vane Socket
- 8.Paint the Nacelle
Overview
Materials needed
| No. | Name | Units | TsDC-ID | Reference |
|---|---|---|---|---|
| 5 | nacelle | 1 | ASM-MEC | |
| 5.01 | housing bearing | 2 | COM-BUY | UKF205, ball bearing unit with cast metal housing, locking on shaft via set screw |
| 5.02 | bearing mounting plate | 1 | COM-MAN | Laser part, steel S235 or S355, 6 mm thick, no surface treatment, BearingMountingPlateUkf205.dxf |
| 5.03 | upper spacer | 1 | COM-MAN | Laser part, steel S235 or S355, 6 mm thick, no surface treatment, UpperSpacer.dxf |
| 5.04 | lower spacer | 1 | COM-MAN | Laser part, steel S235 or S355, 6 mm thick, no surface treatment, LowerSpacer.dxf |
| 5.05 | yaw pipe | 1 | COM-BUY | Cylindric pipe, steel, no surface treatment, 60.3 x 3.65 x 140 mm |
| 5.08 | exterior metal paint | 1 | COM-BUY |
Tools needed
| No. | Name | |
|---|---|---|
| 1 | Welder | |
| 2 | Welding equipment | Gloves, Helmet, Welding Magnets |
| 3 | Square | |
| 4 | Angle Grinder | |
| 5 | Safety Glasses | |
| 6 | Level | |
| 7 | Meter |
Build
1.Place Upper Spacer on to the Yaw Pipe
2.Tack-weld Upper Spacer on to the Yaw Pipe
3.Place and Bearing Mounting Plate and Lower Spacer
4.Tack-weld Bearing Mounting Plate and Lower Spacer
5.Weld Bearing Mounting Plate and Lower Spacer
6.Place the Wind Vane Socket
15mm distance
7.Weld the Wind Vane Socket
8.Paint the Nacelle
