ImanOverview
In this section we focus on carving the Rotor Blade by hand from a piece of wood. Use the CAD file to gain a better understanding of the diamensions as long as we did'nt put numbers on the renderings.
This method is heavily inspired by Performance analysis and improvement of a small locally produced wind turbine for developing countries, section "Blade manufacturing manual for the new rotor design", p.111, by Nienke Hosman.
Folloging variables are used:
| Variables | mm |
|---|---|
| blade length R | 900 |
| wood length L | 1000 |
| blade width W | 80 |
| minimum wood thickness H | 25 |
| chord C | 80 |
| M | 150 |
| N | 75 |
| B | 67 |
| A | 33 |
| D | 10 |
| airfoil thickness T | 10 |
| a1 | 10 |
| a2 | 3 |
| a3 | 24 |
| blade angle θ | 7° |
Materials
See pos. 1 in the BOM, not all materials listed there may be required at this point.
Build
1.
2.
3.
4.
5.
