5.Let's-build/Wind-Vane.md

@@ -3,10 +3,10 @@
 
 # Overview
 
-> short introduction + rendering with arrows
-
 ![SubAssembly.WindVane_Description](../img/WindVane/SubAssembly.WindVane_Description.png)
 
+In this section we concentrate making the Vane and paint all the parts. The final assmbly of the Wind Vane is done [here](6.Let's-assemble.md#5windvane).
+
 # Materials needed
 
 | **No.** | **Name**                  | **Units** | **TsDC-ID** | **Reference**                                                                      |
@@ -27,6 +27,8 @@
 
 ## 2. Cut out the Vane
 
+The Vane can be cut either by hand or with a laser cutter, we provide a DXF file as a template [here](https://git.erni-kollektiv.org/erni/windkit/-/blob/master/Export/LaserCutterFiles/WoodMultiplex6mm/vane.dxf).
+
 ![SubAssembly.WindVane_2](../img/WindVane/SubAssembly.WindVane_2.png)
 
 ## 3. Add mounting holes to the Vane