5.Let's-build/Wind-Vane.md

@@ -5,7 +5,7 @@
 
 ![SubAssembly.WindVane_Description](../img/WindVane/SubAssembly.WindVane_Description.png)
 
-In this section we concentrate making the Vane and paint all the parts. The final assmbly of the Wind Vane is done [here](/6.Let's-assemble#5windvane).
+In this section we concentrate making the Vane and paint all the parts. The final assembly of the Wind Vane is done [here](/6.Let's-assemble#5windvane).
 
 # Materials
 
@@ -25,11 +25,11 @@ The Vane can be cut either by hand or with a laser cutter, we provide a DXF file
 
 ## 3. Add mounting holes to the Vane
 
-### Use the Vane Mounting as a template
+Use the Vane Mounting as a template.
 
 ![SubAssembly.WindVane_3](../img/WindVane/SubAssembly.WindVane_3.png)
 
-### Drill the mounting holes with a 6mm wood drill bit
+Drill the mounting holes with a 6mm wood drill bit.
 
 ![SubAssembly.WindVane_4](../img/WindVane/SubAssembly.WindVane_4.png)