• Overview
• Materials
• Build
  • 1. Cut the Vane Pipe
  • 2. Cut out the Vane
  • 3. Add mounting holes to the Vane
    • Use the Vane Mounting as a template
    • Drill the mounting holes with a 6mm wood drill bit
  • 4. Paint the Vane Pipe,Vane Mounting and Vane

Overview

In this section we concentrate making the Vane and paint all the parts. The final assmbly of the Wind Vane is done here.

Materials

See pos. 6 in the BOM, not all materials listed there may be required at this point.

Build

1. Cut the Vane Pipe

2. Cut out the Vane

The Vane can be cut either by hand or with a laser cutter, we provide a DXF file as a template here.

3. Add mounting holes to the Vane

Use the Vane Mounting as a template

Drill the mounting holes with a 6mm wood drill bit

4. Paint the Vane Pipe,Vane Mounting and Vane